digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac10 series silicon bidirectional thyristors mac11 series available non-rohs (standard) or rohs compliant (add pbf suffix). available as ?hr? (high reliability) screened per mil-prf- 19500, jantx level. add ?hr? suffix to base part number. maximum ratings rating symbol value unit peak repetitive off-state voltage (1) (t j = 100c) mac10-1,mac11-1 mac10-2,mac11-2 mac10-3,mac11-3 MAC10-4,mac11-4 mac10-5,mac11-5 mac10-6,mac11-6 mac10-7,mac11-7 mac10-8,mac11-8 v drm 25 50 100 200 300 400 500 600 volts rms on-state current (t c = 75c) i t(rms) 10 amps peak non-repetitive surge current (1 cycle, 60hz, t j = -40 to + 100c) i tsm 100 amps circuit fusing considerations (t j = -40 to + 100c, t = 8.3ms) i 2 t 40 a 2 s peak gate power p gm 10 watts average gate power p g(av) 0.5 watts peak gate current i gm 2 amps operating junction temperature range t j -40 to +100 c storage temperature range t stg -40 to +150 c mounting torque (6-32 screw) (2) 8 in. lb. note 1: ratings apply for open gate condit ions. thyristor devices shall not be tested with a consta nt current source for blocki ng capability such that the voltage applied exceeds the rated blocking voltage. note 2: torque rating applies with use of torque washer. mounting torque in excess of 8 in. lb. does not appreciably lower case to sink thermal resistance. anode lead and heatsink contact pad are common. * soldering temperatures shall not exceed 200c thermal characteristics characteristic symbol maximum unit thermal resistance, junction to case r ? jc 2.0 c/w thermal resistance, junction to ambient r ? ja 50 c/w electrical characteristics (t c = 25c unless otherwise noted) characteristic symbol min typ. max unit peak blocking current (either direction) (v d = rated v drm , gate open, t j = 100c) i drm - - 2.0 ma peak on-state voltage (either direction) (i tm = 14a peak) v tm - 1.3 1.8 volts gate trigger current (continuous dc) (v d = 12v, r l = 100 ? ) mt2(+),g(+); mt2(-),g(-) , mac10, mac11 mt2(+),g(-); mt2(-), g(+), mac10 i gt - - - - 50 75 ma gate trigger voltage (continuous dc) (v d = 12v, r l = 100 ? ) mt2(+),g(+); mt2(-),g(-) , mac10, mac11 mt2(+),g(-); mt2(-), g(+), mac10 v gt - - 0.9 1.0 2.0 2.5 volts gate trigger voltage (continuous dc) (v d = rated v drm , r l = 100? , t j = 100c) all modes v gd 0.2 - - volts sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130207
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac10 series silicon bidirectional thyristors mac11 series characteristic symbol min typ. max unit holding current (either direction) (v d = 12v, i tm = 100ma, gate open) i h - - 50 ma gate controlled turn-on time (i tm = 14a, i gt = 100ma) t on - 1.5 - s blocking voltage applicat ion rate at commutation (@ v drm, t j = 75c, gate open) dv/dt - 5.0 - v/s mechanical characteristic case to-220ab marking alpha-numeric pin out see below sales@digitroncorp.com to-220ab inches millimeters min max min max a 0.575 0.620 14.600 15.750 b 0.380 0.405 9.650 10.290 c 0.160 0.190 4.060 4.820 d 0.025 0.035 0.640 0.890 f 0.142 0.147 3.610 3.730 g 0.095 0.105 2.410 2.670 h 0.110 0.155 2.790 3.930 j 0.014 0.022 0.360 0.560 k 0.500 0.562 12.700 14.270 l 0.045 0.055 1.140 1.390 n 0.190 0.210 4.830 5.330 q 0.100 0.120 2.540 3.040 r 0.080 0.110 2.040 2.790 s 0.045 0.055 1.140 1.390 t 0.235 0.255 5.970 6.480 u - 0.050 - 1.270 v 0.045 - 1.140 - z - 0.080 - 2.030 fax +1.908.245-0555 www.digitroncorp.com rev. 20130207
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac10 series silicon bidirectional thyristors mac11 series sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130207
digitron semiconductors 144 market street kenilworth nj 07033 usa phone +1.908.245-7200 mac10 series silicon bidirectional thyristors mac11 series sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com rev. 20130207
|
